Gas cylinder heaters are large sized heating blankets or jacket heaters to keep the gas cylinders warm during discharging. They have to be custom designed as the application requirement can be very different.
Due to condensation, much gas is often unused in cylinders at low temperature as it remains in liquid state. Cylinders are then not filled to a full level, wasting money on each fillup. This can be alleviated by using our tailor-made silicone rubber heater / heating blanket. The elevated temperature will increase the pressure inside, reducing wasted gas that has condensed.
The main features are:
- Robust design, quick installation and removal.
- Etched foil resistance element ensures uniform heat profile without any overheat spots.
- Wattage and dimensions are custom made exactly per your specific requirement.
- Explosion proof cable exit and quick connectors ensure safe operation. No extra processing is required.
- Integration of thermal cutouts and temperature sensors allows for control and monitoring of the heating process.
- Excellent heat transfer, high energy efficiency.
Gases known to benefit from this process include SF6, NH3, CO2, propane, nitrogen, oxygen, BCl3, WF6, HF, etc. Similar to drum heaters, silicone heating blanket can also be installed by many mechanical methods.
For large gas plant which will process many gas cylinders at one time, central control panel can be supplied for max safety and easy operation. The temperature of all gas cylinders will be monitored and controlled from one single point. Different levels of protection and alarming can be configured.
The picture in the right shows a central controlled heating system we developed for a gas purification plant.
SF6 Cylinder Heater
Electric grid operators use SF6 switchgear for their high voltage (35KV-500KV) transmission lines. The SF6 provides an inert blanketing media that prevents arcing when the circuit breakers open and close. SF6 is stored in cylinders in liquid form under pressure. Periodically, maintenance crew need to hook up the storage cylinders to the circuit breakers to replenish SF6 to the breaker and maintain the system’s operating pressure.
When the valve is opened and gas flow begins, the cylinder temperature drops rapidly and slows down the flow of SF6 into the circuit breaker. Heat must be added to the cylinder to make up the heat losses caused by vaporizing from liquid to gas. Applying heat safely not only converts this time consuming activity into an efficient and convenient operation, but also ensures maximum removal of SF6 from the cylinder and best use of cylinder capacity when no suctioning device is used.
Our SF6 cylinder heaters provide a simple and quick method for supplying supplemental heat to SF6 containing cylinders. Thermal cutout are designed into all cylinder heaters to guard against overheat and decomposition of SF6. Thermal efficiency is improved through the use of a thermal insulated heating blanket.